Metalubs X New

Metalubs X New is a high-tech metal surface treatment with an excellent friction reducing effect. It is particularly recommended for new petrol, diesel, gas, Wankel and turbo engines, with max. 100,000 km.

Instructions

Add to the oil at a ratio of 5-10% (minimum 0.5 dl Metalubs X New to 1 litre oil) for first treatment. Use it at every oil change. The mixing ratio for second treatment is 2.5%.

Warning
Do not use it in worn engines.
Validity: Unlimited

Features
Lubricates even in extreme conditions
Reduces operation temperature
Extends oil change interval
Reduces harmful emissions
Environmentally friendly
Reduces friction by 60%
Reduces engine noise
Smooth engine running
Extends engine life

250 ml ℮
8.45 fl.oz
Made in Germany

Metalubs X Multi

Metalubs X Multi is a high-tech metal surface treatment with excellent friction reducing effect. It is recommended for petrol, diesel, gas, Wankel and turbo engines, switch gears, differential gears, drive gears and industrial equipment in a variety of fields (railways, navigation, power plants, sewing machines etc).

Instructions:

Add to the oil at a ratio of 5-10% (minimum 0.5 dl Metalubs X Multi to 1 litre oil) on first treatment. Use it at every oil change. The mixing ratio for second treatment is 2.5%.

Validity: Unlimited

Features:
More Power
Easy engine start
Reduces frictions by 60%
Reduces opertion temperature
Reduces engine noise
Turbo and catalyst tested
Reduces harmful emissions
Environment friendly
Extend engine life
Reduces fuel consumption
Extends oil change interval
Lubricates even in extreme conditions

250 ml ℮
8.45 fl.oz
Made in Germany

Metalubs X Protect

Metalubs X Protect is a unique high tech, poly-ceramic metal surface treatment. The specially developed, environment friendly Metalubs X Protect is particularly suitable for use in new, used and worn petrol, diesel, gas, and turbocharged engines.

Dosage:
Replace between 5-10% of the engine oil, and 10% of the transmission oil with Metalubs X Protect.

Note:
Suitable only for manual transmission and differential locks! Shake ewll before and pour into the hot engine!

Features:
More power
Easy engine start
Extend engine life
Reduce harmful emissions
Reduce fuel consumption
Reduces frictions by 60%
Reduces operation temperature
Reduces engine noise
Extends oil change interval
Lubricates even in extreme conditions
Turbo and catalyst tested
Environment friendly

Metalubs X Old

Metalubs X Old is a high tech engine treatment with high viscosity basic material. It contains polyceramic components, with excellent friction reducing and sealing effect. It is recommended for all worn explosion engines with high oil consumption – whether they are petrol, diesel, Wankel, gas or turbo.

Instructions:
Replace 5 to 10% of the engine oil volume, and 10% of the gear oil with X Old. Pour X Old (put it into hot water), turn it into the hot engine! Heat the box to 25-30 upside down and shake well before use. Operate the engine for short time, then travel on. Not a single treatment is used, replace it preferably in case of all oil changes in the same ratio.

Validity: Unlimited

Features:

250 ml ℮
8.45 fl.oz
Made in Germany

Metalubs X T

Metalubs X T is a high-tech transmission treatment developed to increase the lifetime of manual transmissions, differential gears and industrial gears. Due to its Metalubs X T friction reducing content, operating temperature and noise significantly reduces, at the same time performance improvement and energy saving is achieved.

Instructions:
It does not require skill or tools, simply add it to the fresh lubricated oil in a ratio of 5 to 10%. It is recommended to be used in case of all oil changes. the mixing ratio is 5% for post treatment. Shake it before use!

Validity: Unlimited

Features:
Extends the lifetime of the transmission
Reduces transmission noise
Lubricates in extreme conditions

250 ml ℮
8.45 fl.oz
Made in Germany

Metalubs X CL

High-tech cleaner for petrol, diesel and gas operated engines, switch gears and differentials gears. it contains special solvent components that removes resin deposits and contaminants from the lubricating system. With its use oil and fuel consumption are reduced. No harmful engine acid remains, witch would damage the fresh oil .

Instructions:
Pour the contents of Metalubs X CL (250 ml) to the used oil before oil change, then run the engine for 10 to 15 minutes. The contents of one bottle is sufficient for cleaning an engine between 5 to 8 litre of oil capacity. After cleaning is done the oil and the oil filter must be replaced.

Validity: Unlimited

Features:
Restores engine performance & compression
Extends the lifetime of the catalyst and DPF filter
Acid free composition

250 ml ℮
8.45 fl.oz
Made in Germany

Metalubs X P

Metalubs X P is a high-tech fuel treatment developed for petrol operated engines. Due to its Metalubs X P content the lifetime of the fuel supply system significantly increases, harmful emissions are reduced, valves are continuously cleaned, at the same time performance improvement and fuel economy is achieved.

Instructions:
40 ml per 40 litre must be poured into the tank in the first 200 litre of petrol, directly before refueling. then regularly add 20 ml to each 40 litre of petrol. (Dosage recommended for Europe)

Validity: Unlimited

Features:
Improves fuel economy
Smooth engine running
Cleans fuel injector
Prevents injector nozzle from smear-off
Neutralizes water contamination
Corrosion inhibitor protection
Removes carbon deposits from valves
Extends maintenance period
Extends the lifetime of the Catalyst
Reduce harmful emissions
Environment friendly

250 ml ℮
8.45 fl.oz
Made in Germany

Metalubs X D

A high-tech fuel treatment developed for diesel operated engines. Due to its Metalubs X D content the lifetime of the fuel supply system significantly increases, harmful emissions are reduced, valves are continuously cleaned, at the same time performance improvement and fuel economy is achieved.

Instructions:
40 ml per 40 litres must be poured into the tank in the first 200 litres diesel fuel, directly before refueling. Then regularly add 20 ml to each 40 litres of diesel fuel.

Validity: Unlimited

Features
Improves fuel economy
Smooth engine running
Cleans fuel injector
Prevents injector nozzle from smear-off
Neutralizes water contamination
Corrosion inhibitor protection
Removes carbon deposits from valves
Extends maintenance period
Extends the lifetime of the DPF filter
Reduce harmful emissions
Environment friendly

250 ml ℮
8.45 fl.oz
Made in Germany

Metalubs X S

Metalubs XS is a high-tech metal surface treatment with a wide range of applications. It can be used together with oils and greases. Metalubs XS creates a chemical bond with metal molecules, and creates a very hard, very smooth and wear-resistant surface, which
resists to damages resulting from friction even under extreme loads.

Instructions:
Apply Metalubs XS on the surface to be treated with the pumped distribution head (extended with a pipe if necessary). Wait 1 or 2 minutes for the product to take effect. It is not flammable.
Validity: Unlimited

Features:
Reduces friction
Lubricates even in extreme conditions
Extends the useful life of metal components
Extends the useful life of metal tools
Compatible with all oils and greases

500 ml ℮
16.9 fl.oz
Made in Germany

.

Metalubs X HT NLGI 2 grease

Metalubs X HT grease can be used for sliding and roller bearings under heavy loads, low to high speeds, low and high temperatures, as both universal grease for general machine lubrication in industry and crafts, as well as for demanding lubrication points. It ensures good sealing and resistance in wet or dusty environments. Good pumpability, even by long lubrication lines. A multipurpose grease for the lubrication of vehicles as well as for industrial, construction and agricultural machinery, even if they are used under difficult conditions.

Emergency running properties with micro ceramic additive.

Reduces friction, long term lubrication
Lubricates even in extreme conditions
Extra wide temperature range
Good sealing properties

400 g ℮
14 oz
Made in Germany

Metalubs X WF

Metalubs X WF is a high pressure grease recommended for the lubrication of vehicles as well as for industrial, construction and agricultural machinery, even when used under difficult conditions (shock loads, high humidity, salt water). In high load sliding and roller bearings of all types of machines, in joints and tie rod joints, guided tours of lifting equipment, slide and bed ways, flexible shafts, water pumps, heavy duty bearings. In low maintenance long-term lubrication for wheel bearings of machinery, motor vehicles, agricultural vehicles, tractors, cranes, forklifts.

Reduces friction, long term lubrication
Lubricates even in extreme conditions
Wide temperature range
Water resistance even in seawater
Extreme pressure resistant
Resists in acidic and basic environment

400 g ℮
14 oz
Made in Germany